10.5W A19 Globe Review

General Information

ID #127
SKU 985686
Series VisionLED
Manufacturer Philips (other LEDs from Philips)
Fitting Type E26 (other E26 LEDs)
Light Type Globe
Height 100mm
Width 55mm
Weight 124g
Warranty 3 Years
Test Date 2013-05-23
Review Notes Except for the lack of dimming, this is a pretty good LED light. A true 60W replacement, reasonable CRI & power factor. Plus a good spread of light.
Price $14.97 (USD) from Home Depot on 23rd of May 2013


LED Specifications

Claimed Measured Compared To
Watts 10.5W 10.97W @ 123V 64.7W @ 246V
Yearly Running Cost[?] $2.30 $2.40 $14.17
Lumens 800 lm 817 lm 811 lm
Efficiency[?] 76 lm/W 74 lm/W 13 lm/W
Lumens/Purchase Price 53 lm/$ 55 lm/$ 406 lm/$
Power Factor[?] N/A 0.79 1
Color [?] Warm White, 3000K Warm White, 2956K Warm White, 2711K
Angle[?] Omni-Directional 142° Omni-Directional
Dimmable Not Dimmable N/A Yes, Trailing Edge
CRI (Color Accuracy)[?] 85 81
Life 20,000 hours Not Measured 1,000 hours
Min/Max Voltage N/A / 120V 240V / 240V
Min/Max Temperature N/A / N/A N/A
Measured Temperature 71°C @ 25°C ambient
160°F @ 77°F ambient
158°C @ 25°C ambient
316°F @ 77°F ambient
Flicker Percent[?] 20% 11%
Flicker Index[?] 0.063 0.034


Link to manufacturer specifications at time of testing



Distribution Graph

Angle: 142° (±71° from bottom), Maximum lux:

Graph notes: Shows the intensity of the light when viewed from different angles. Normal omni-directional globes have a fairly constant output all the way around (excepting directly above). Downlights have a narrow range at the bottom in which the light is emmited, this determines their angle.


Spectrum Graph

Representation of color spectrum

Graph notes: Shows the breakdown of the LED light into its component colors. With short wavelength ultraviolet on the left and long wavelength infrared on the right. The green line represents the relative absolute strength of the light at each frequency, while the red line represents what the typical human eye would see. The human eye is most sensitive to green light, but much less sensitive to purples and deep reds.


Flicker Graph

Graph of measured flicker

Percent: 20%, Index: 0.063 (lower is better in both cases)

Graph notes: Shows variation in light output over 1/10th of a second, with relative light output on the Y axis and time on the X Axis. Measured with a photodiode connected to an Oscilloscope. Ideally the yellow line should be flat. Low frequency high amplitude waveforms mean there is a possibility of noticeable flicker, but sensitivity to flicker varies between people. [More details about LED flicker]


LEDs in this Series

Name Price Watts Lumens Efficiency Color Angle Fitting
10.5W A19 Globe $15 (USD) 10.97W 817lm 76lm/W Warm White, 2956K 142° E26
10.5W SlimStyle A19 Globe Soft White $9 (USD) 10.6W 706lm 76lm/W Warm White, 2728K N/A E26
7.5W A19 Globe $14 (USD) 7.6W 439lm 60lm/W Warm White, 3000K 141° E26
7W A60 Globe $25 (AUD) 7.5W 338lm 50lm/W Warm White, 2773K 143° E27


Disclaimer: While every effort has been made to ensure the accuracy of these results, each measurement carries an inherent degree of uncertainty and error. Safety and EMC compliance of products to regional or international standards have not been verified unless noted as an ENERGY STAR® LED Lighting Facts, or SSL Quality Scheme certified product. Retailers and importers selling unmarked or unapproved electrical goods can be fined or imprisoned. Mains supplied downlights require installation by a licensed electrician.