10 WW A19 Dimmable Review

General Information

ID #140
Series N/A
Manufacturer Aluratek (other LEDs from Aluratek)
Fitting Type E26 (other E26 LEDs)
Light Type Globe
Height 115mm
Width 58mm
Weight 186g
Warranty 3 Years
Test Date 2013-05-31
Review Notes A reasonable globe with slightly above average specifications.
Price $29.99 (USD) from Aluratek on 30th of May 2013


LED Specifications

Claimed Measured Compared To
Watts 10W 10.3W @ 122V 64.7W @ 246V
Yearly Running Cost[?] $2.19 $2.26 $14.17
Lumens 720 lm 583 lm 811 lm
Efficiency[?] 72 lm/W 57 lm/W 13 lm/W
Lumens/Purchase Price 24 lm/$ 19 lm/$ 406 lm/$
Power Factor[?] N/A 0.8 1
Color [?] Warm White Warm White, 2991K Warm White, 2711K
Angle[?] 130° 135° Omni-Directional
Dimmable Yes, Leading Edge N/A Yes, Trailing Edge
CRI (Color Accuracy)[?] N/A 82
Life 50,000 hours Not Measured 1,000 hours
Min/Max Voltage N/A / 120V 240V / 240V
Min/Max Temperature N/A / N/A N/A
Measured Temperature 75°C @ 25°C ambient
167°F @ 77°F ambient
158°C @ 25°C ambient
316°F @ 77°F ambient
Flicker Percent[?] N/A 11%
Flicker Index[?] N/A 0.034


Link to manufacturer specifications at time of testing



Distribution Graph

Angle: 135° (±67.5° from bottom), Maximum lux:

Graph notes: Shows the intensity of the light when viewed from different angles. Normal omni-directional globes have a fairly constant output all the way around (excepting directly above). Downlights have a narrow range at the bottom in which the light is emmited, this determines their angle.


Spectrum Graph

Representation of color spectrum

Graph notes: Shows the breakdown of the LED light into its component colors. With short wavelength ultraviolet on the left and long wavelength infrared on the right. The green line represents the relative absolute strength of the light at each frequency, while the red line represents what the typical human eye would see. The human eye is most sensitive to green light, but much less sensitive to purples and deep reds.


Disclaimer: While every effort has been made to ensure the accuracy of these results, each measurement carries an inherent degree of uncertainty and error. Safety and EMC compliance of products to regional or international standards have not been verified unless noted as an ENERGY STAR® LED Lighting Facts, or SSL Quality Scheme certified product. Retailers and importers selling unmarked or unapproved electrical goods can be fined or imprisoned. Mains supplied downlights require installation by a licensed electrician.