7W MR16 - ILLU500 Review

General Information

ID #330
SKU Illu500-MR16
Series Illu500
Manufacturer Eledco (other LEDs from Eledco)
Fitting Type MR16 (other MR16 LEDs)
Light Type Downlight (PAR)
Height 52mm
Diameter PAR15 (49mm)
Weight 64g
Warranty 3 Years
Test Date 2015-01-07
Review Notes Non-dimmable version of Eledco's dimmable 7W ILLU 500 spotlight. Compatible with 12V AC/DC transformers. Has good efficiency for a MR16 LED, no flicker, long warranty, accurate specs & a good price. Overall it is one of the better MR16s tested. However it isn't dimmable, and isn't as bright as a 50W halogen. Price is $19.95 with free shipping, or $15 in bulk.
Price $15 (AUD) from Apartmentlifestyle.com.au on 15th of January 2015
Rating

 

LED Specifications

Claimed Measured Compared To
Watts 7W 7.3W @ 12V
Electronic Transformer
54.7W @ 12V
Yearly Running Cost[?] $1.53 $1.60 $11.98
Lumens 500 lm 529 lm 765 lm
Efficiency[?] 71 lm/W 72 lm/W 14 lm/W
Lumens/Purchase Price 33 lm/$ 35 lm/$ 170 lm/$
Power Factor[?] N/A 0.99 1
Color [?] Warm White, 3000K Warm White, 3042K Warm White, 3015K
Angle[?] 60° 57° 45°
Dimmable Not Dimmable N/A Yes, Trailing Edge
CRI (Color Accuracy)[?] 82 82
Life 30,000 hours Not Measured 6,000 hours
Min/Max Voltage N/A / 12V N/A
Min/Max Temperature N/A / N/A N/A
Measured Temperature 68°C @ 25°C ambient
154°F @ 77°F ambient
256°C @ 25°C ambient
493°F @ 77°F ambient
Flicker Percent[?] 2% 3%
Flicker Index[?] 0.003 0.008

 

Link to manufacturer specifications at time of testing

 

Advertisement

Distribution Graph

Angle: 57° (±28.5° from bottom), Maximum lux:

Graph notes: Shows the intensity of the light when viewed from different angles. Normal omni-directional globes have a fairly constant output all the way around (excepting directly above). Downlights have a narrow range at the bottom in which the light is emmited, this determines their angle.

 

Spectrum Graph

Representation of color spectrum

Graph notes: Shows the breakdown of the LED light into its component colors. With short wavelength ultraviolet on the left and long wavelength infrared on the right. The green line represents the relative absolute strength of the light at each frequency, while the red line represents what the typical human eye would see. The human eye is most sensitive to green light, but much less sensitive to purples and deep reds.

 

Flicker Graph

Graph of measured flicker

Percent: 2%, Index: 0.003 (lower is better in both cases)

Graph notes: Shows variation in light output over 1/10th of a second, with relative light output on the Y axis and time on the X Axis. Measured with a photodiode connected to an Oscilloscope. Ideally the yellow line should be flat. Low frequency high amplitude waveforms mean there is a possibility of noticeable flicker, but sensitivity to flicker varies between people. [More details about LED flicker]

 

LEDs in this Series

Name Price Watts Lumens Efficiency Color Angle Fitting
7.0w MR16 - ILLU500 $23 (AUD) 7.5W 452lm 76lm/W Warm White, 3112K 46° MR16
7W MR16 - ILLU500 $15 (AUD) 7.3W 529lm 71lm/W Warm White, 3042K 57° MR16

 

Disclaimer: While every effort has been made to ensure the accuracy of these results, each measurement carries an inherent degree of uncertainty and error. Safety and EMC compliance of products to regional or international standards have not been verified unless noted as an ENERGY STAR® LED Lighting Facts, or SSL Quality Scheme certified product. Retailers and importers selling unmarked or unapproved electrical goods can be fined or imprisoned. Mains supplied downlights require installation by a licensed electrician.